CSC8510 Assessment 3 Write a network design proposal
CSC8510 Assessment 3: This is an introductory networking course. We expect you to demonstrate the skill and knowledge you have learnt in this course rather than the skill and knowledge you may have acquired elsewhere. Please raise queries about this report in the Assessment 3 (Report) Forum to share the queries and the answers. Do not sent personal email to the lecturer.
Part A (85 marks)
About FunElectronics: • FunElectronics (FE) has two offices, one in Toowoomba and one in Brisbane. • There are four teams of employees: o Design – 100 employees, working in Toowoomba office o Finance – 40 employees, working in Toowoomba office o Management – 10 employees, working in Brisbane office o Sales – 200 employees, working in Brisbane office • All 4 teams will be accessing 20 servers located in the Brisbane office. • No wireless connection is required in both offices. • For simplicity, consider the gateways of the two offices are linked directly without involving any extra intermediate / external device. • Internet connection is not expected for both offices for this proposal. However, the FE network will eventually connect to the Internet. Basic requirements of your design: • Design an address scheme for FE: o Consider the use of private and global IPv4 addresses.
CSC8510 Assessment 3o State the use of which address(es) you have to pay for. o List the (range of) addresses used by the four teams, the servers and the gateway(s) o Keep in mind that the network will eventually connect to the Internet. • Use static routes between the gateways. • State how PCs in Toowoomba can connect to servers in Brisbane. o List the devices a packet traverses from Toowoomba to a server in Brisbane. o List the source and destination IP addresses, Mac addresses of a packet travelling from a PC in Toowoomba office to a server in Brisbane office and back to the source PC.
CSC8510 Assessment 3 ▪ Assume that the packet can travel directly between the gateways in Toowoomba and Brisbane without going through any intermediate device. ▪ Assign a MAC address to the source PC, the destination server, and each of the intermediate device traversed. ▪ List the source and destination IP addresses, source and destination Mac addresses when a packet travels from a PC in Toowoomba to a server in Brisbane and back to the source PC.
CSC8510 Assessment 3 • Your design (PDF file) submitted should be less than 10 pages (Font size at least 10). • Provide a report on your design less than 10 pages, in pdf format and including at least: o The requirements of the network o Details of your design for the FE network o List your design considerations, your reasonings and your conclusions and how your design can match each of the requirements ▪ What are the alternatives?
CSC8510 Assessment 3▪ Which one is your preferred choice and why? ▪ Example: o router 1 G0/0 using IPv4 126.96.36.199/30 connects to router 2 G0/0 using IPv4 188.8.131.52/30 o IPv4 184.108.40.206 and 220.127.116.11 are globally routable (ITN Module11 slide 13) o /30 reduce the IP address wastage as it allows 2 hosts only. (ITN Module11 slide 25) • Provide a Packet Tracer file to demonstrate your design: o You must use Packet Tracer version 8.0.1. Other versions may not be compatible, and we may not be able to open your file(s). o Use 2 PCs to represent a network / subnet etc. o Connect PCs to switch(es) using UTP cables o Connect switch(es) to router(s) using UTP cables o Connect gateway to gateway (such as routers between Toowoomba and Brisbane) using Serial (WAN) cables Submit your work as PartA.pdf e.g. U123456PartA.pdf and PartA.pkt e.g. U123456PartA.pkt
Visit : https://auspali.info/
Also Visit : https://www.notesnepal.com/archives/8764